Hotbox Greenhouse Heatersder Securely Onlinego to basketcheckout
Garden EquipmentGas Electric HeatersPropagation PanelsGrowth GeneratorsHeating Accessories
Fruit and Vegetable Cages and Netting
Garden Equipment
Rustic Products Bird Feeders and Nest Boxes
Greenhouse Heaters
Propagation Panels »
Growth Generators
Accessories
Service and Repairs
Greenhouse Heater Selection Chart

Privacy
Terms & Conditions
Contact Us
Basket
Checkout
Home
Bookmark Us
Print this Page

Propagation Panels - Hobby Heatwave

These electric propagation panels generate heat from underneath which encourages rapid and strong growth of both seeds and cuttings, germination and rooting. Each panel is factory assembled.
Electric propagation panels offer full thermostatic control,  when used with the wired in thermostat , proven in use by professional growers. If ordered with a panel the thermostat will be wired in at the factory.
Thermostats may be ordered separately and includes a 13Amp plug and 1.5 Metre lead.
 
 
Installation is simple
Lay  50mm. (2" )thick polystyrene panels on your bench.This will ensure that all the heat travels upwards and is not wasted. Then lay the Hobby Heatwave  Propagation Panel on top and cover with a layer of polythene sheet. This will ensure a longer life by avoiding the seed trays.from scraping over the panel.
Then place your seed trays on top of your panel , insert the thermostat probe into the potting compost and switch on. When plugged in the Propagation Panel will generate heat but to control the temperature precisely a thermostat may be required. If ordered with the panel or panels it will be wired in free of charge and supplied with a 5Amp fused English plug.
Capillary matting may be placed under the seed trays if required.
The whole Propagation Panel may be gently rolled up and stored at the end of the season to free up your benches for other work and to avoid undue wear and tear. The Panel should be wiped clean and dried before rolling up.
The following Panels are made as stock sizes operating on 230Volts.
 
115cm x 40cm (3'-9" x 16")      70 watts       £73.00     (Retail Price Inc. VAT & Delivery)
75cm x 60cm (2'-6" x 2'-0")      67 watts       £73.00          "          "          "          "
120cm x 35cm (4'-0" x 14")      70 watts       £73.00          "          "          "          "
173cm x 50cm (5'-8" x 20")      130 watts     £80.00          "          "          "          "
229cm x 50cm (7'-6" x 20")      180 watts     £92.00          "          "          "          "
150cm x 80 cm (5'-0" x 2'-7")   180 watts     £92.00          "          "          "          "
200cm x 60cm (6'-6" x 2'-0")    180 watts     £92.00          "          "          "          "
300cm x 40cm (9'-10" x 16")    180 watts     £92.00          "          "          "          "
334cm x 60cm (11'-0" x 2'-0")  300 watts   £155.00          "          "          "          "
500cm x 40cm (16'-5" x 16")    300 watts   £155.00          "          "          "          "
 
Polythene sheet is available at 610mm wide and may be cut to any length.
 
e.g.  600 (nominal) wide x 2050 long           £3.00       (Retail Price Inc. VAT & Delivery)
 
Polystyrene blocks are one size only
600mm x 400mm x 50mm thick                   £5.00          "         "          "          "
 
E.g  600 x 2000 panel you will need 5 blocks
 
 
Propagation Panels - Hobby Heatwave

About Propagation
Using a Hobby Heatwave Propagation Panel , you can dramatically improve the success rate from your seeds and cuttings. Many seeds and cuttings benefit from a boost in temperature to around 10 degrees C , when planted at cooler times of the year. Plants should be grown cold for the last 2-3 weeks to harden them off.
 
Temperature controlled soil at root level will create the very best environment for the rapid growth of cuttings. The bulb on the thermostat should be inserted into the soil to measure the soil temperature.
 
Hotbox Propagation Panels are made from 2 layers of robust aluminium foil with a PTFE coated electric heating element sandwiched in between. Aluminium foil is better than plastic since it spreads the heat uniformly and avoids hot spots.
 
These panels are made in Halifax and earthed for complete safety.
 
Several sizes are made for stock as listed below.
 
Up to 3 panels may be wired together into the same thermostat to give a more versatile arrangement , for instance , one panel along the length and another panel along the end of your greenhouse , or 2 or more similar panels placed in parallel.
 
Complete thermostats are also sold separately £46.00 with 13 Amp plug and socket.
 
  • Made in Aluminium

  • Simple to install

  • Selection of standard sizes
  • Even Heat Distribution

  • No Wasted Space

    • Used Worldwide
    • Proven Track Record
     
     

    Qty:

    Only: £155.00

    Extras:
    (For the 200cm X 60cm) 2" thick polystyrene panels 60 x 40 x 5cm deep £2.50 per panel (5 panels) +£12.50
    (For the 200cm X 60cm) polythene sheet 60cm wide £2.00/Metre +£4.00
    (For the 115cm X 40cm) 2" thick polystyrene panels 60 x 40 x 5cm deep £2.50 per panel (2 panels) +£5.00
    (For the 115cm X 40cm) polythene sheet 60cm wide £2.00/Metre +£2.30

    Complete Thermostat:
    (including mains cable plug) (All) (£46.0000) +£46.00



    People who purchased this also purchased...
    Auto Changeover Valve

    Auto Changeover Valve

    Click for More Info

    Fir Tree Heaters

    Copyright Kirklees Developments Ltd
    Site design & maintenance by Bang Online